Internormen hydraulic filter

Different Internormen hydraulic filter products are currently produced under Eaton company. Eaton Company is a multinational company which is currently headquartered in Ireland. However, Eaton's strategic origin is in the United States and its headquarters is located in Ohio, America. In 2005, this holding company purchased Internormen Technology Group and continues to manufacture and supply Internormen hydraulic filters. Originally a German company, Internorman was headquartered in Altlussheim on the banks of the Rhine before being acquired by Eaton. Since 2005, Internormen Hydraulic Filter Products has been owned and managed by Eaton, but in practice, much of the research, production and development of filtration products is carried out in Germany. Therefore, it can be said that the roots of the Internorman filter are still in Germany. Since 2005, Internorman has been under the ownership of Eaton.

The unique features of the Internormen hydraulic filter include things such as the use of advanced manufacturing technology as well as high-quality raw materials that result in the ability to separate very fine particles and various contaminants from hydraulic oil, and this element of the Internormen filter increases The life and efficiency of the hydraulic circuit. In addition, this company's ability to quickly implement new technologies has caused its products to be synchronized with industrial progress. The wide range of Internormen hydraulic filters, from high pressure filters to suction line filters and other lines, each of which is designed for specific applications, and Internormen covers all of them. Internormen filters are produced according to international quality standards such as ISO and ASME. International certification based on ISO 9001:2000 is the result of high quality manufacturing standards of this brand. The internorman element has different genders. One of the main materials used in the Internormen hydraulic filter in various applications is glass fiber with the abbreviation "VG" which causes deep filtration and has suitable filtration in circuits with high pressure difference. This type of material of Internorman filter elements has the ability to maintain and hold high capacity of contaminated particles and can be used for natural hydraulic oils as well as most synthetic fluids and lubricants. Internormen filter element with paper mat material with the abbreviation "P" which has advantages such as deep filtration. This type of filter material is a paper mat consisting of polyester fibers and paper with stability in absorbing pollution and strength of high constituents in two sizes of 10 micrometers. and 25 micrometers are used in all types of Internorman filter elements. Stainless steel mesh with the abbreviation "G" in the Internormen hydraulic filter element range has advantages such as surface filtration, stainless steel wire mesh, it can be cleaned to some extent and is used in three sizes of 25 micrometers, 40 micrometers and 80 micrometers. This type of Internormen hydraulic filter elements provides a high resistance factor against the contamination of all types of hydraulic fluids.

In the continuation of the contents and the introduction of the capabilities of Kara Kara Company, on this page, we will provide explanations and technical application data about the two types of hydraulic filters used by Internorman Company in Iran's industries, i.e. the return filter and the pressure filter, of course, to obtain additional data and to know the price. Internorman filter element, you can contact the experts of the commercial unit of Kara Kara Company whenever you want.

Types of Internormen filter elements of the return line include 01E - 01NR - 01RS series and can be ordered by specifying specifications such as size, material and degree of micron filtration and additional specifications. But most of them are from 01E series. This type of return line Internormen hydraulic filter is designed to be connected in the return pipes to the tank and the direction of oil flow is from outside to inside. The size of the return pipes and the inlet pressure of these types of filters must be lower than the values ​​specified in the catalog. The technical code of an Internormen hydraulic filter for the return line contains information such as size, filter material specifications and micron grade, the possible resistance of the element filter in the maximum pressure difference, whether the element filter is equipped with a return valve or not, the type of filter seal, the side characteristics of the element filter, Its connection type, filter housing specifications, and details indicate filter contamination, and because of that, all the data required by the circuit, which is considered by the device designer from an operational point of view, are included in it. Internormen filter element in the field of filtration are known as elements with high intrinsic stability and excellent filtration ability, high pleat and dirt capacity with long life. When replacing the Internormen hydraulic filter element, care must be taken that the contaminated part is drained before moving the filter to ensure that no contaminated fluid enters the drain pipes. After reducing the filter oil pressure or draining its contaminated side and removing the filter cover, the element must be removed and a new element must be installed.

The Internormen hydraulic filter element of the pressure line is also known by codes such as - 01NL 01NR - 01E, and to order them, provide specifications related to the Internormen filter element series, the size and type of connections, its material and degree of filtration, the pressure difference It is necessary due to the presence of the element on the line, the structure of the filter element, the type of flood and the supplementary specifications of the Internormen filter. The most important thing for the Internormen hydraulic filter element is the pressure line related to the amount of working pressure behind it. The pressure line element must be able to absorb oil pressure peaks with a sufficient safety margin. Based on the performance of the system, in order to move the internal filter element in the hydraulic circuit, it is necessary to install equipment so that it is possible to replace the dirty strainer with a clean sample without interrupting its operation or switching it to other conditions. Some series of Internormen hydraulic filter elements can also be installed as suction filters. The material and coating of the Internormen hydraulic filter element of the pressure line as well as the way of connecting its components together have resulted in excellent filtration capability with high stability, high pollution holding capacity and long life in the hydraulic circuit. The degree of filtration depends on the material of the internal filter element, and attention should be paid to the choice of that type of hydraulic system fluid.