The filter of the hydraulic pressure line is installed after the pump and in the pressure line and is designed in such a way that against the working pressure of the system and the flow rate, they can trap fine pollution particles. The pressure line filter is often used to protect the sensitive components of the system, such as valves, against wear, jamming and sedimentation. Sensitive components are usually installed immediately after the filter.
Since these filters are located after the pump, they help to protect the entire components of the hydraulic system and also remove the pollution created in the pump from the system. It has a pump. These types of filters have many differences with the return line filter.
Rexote Pressure Line Filter Application
German Rexroot pressure line filter is usually placed after the hydraulic pump to remove the excess particles inside the oil. The filter placed at this point should have the highest micron level and pressure tolerance level. After this path, the oil enters the actuator and other control valves, the presence of this filter is very important and necessary. Pressure line filters are widely used in fixed and mobile units in road construction and hydraulic machines.
The advantages of the Rexrot Pressure Line Filter: Rexroth
Among the advantages of using this filter, the following can be mentioned
Increasing the life of the system
Eliminating possible risks that lead to eliminating Operators and the system will become redundant if there are particles.
High pressure oil filtering without pressure drop in the system
Be careful that; The hydraulic filter prevents the components of your hydraulic system from being damaged by the contamination of oil or other hydraulic materials due to the use of particles. Every minute, approximately one million particles larger than 1 micron (0.001 mm or 1 micrometer) enter a hydraulic system. These particles can damage hydraulic system components.
A hydraulic filter It helps to remove these particles and cleans the oil continuously. The performance of each hydraulic filter is measured by its pollution removal efficiency.