The advantages of the Rexrot Pressure Line Filter: Rexroth
Among the advantages of using this filter, the following items can be mentioned.
Increasing system life
Eliminating possible risks that lead to the destruction of operators and the system in case of excess particles.
Filtering high -pressure oil without pressure drop in the system
Be careful that; The hydraulic filter prevents the components of your hydraulic system from being damaged by the contamination of oil or other hydraulic materials due to the use of particles. Every minute, approximately one million particles larger than 1 micron (0.001 mm or 1 micrometer) enter a hydraulic system. These particles can damage hydraulic system components. Because hydraulic oil is easily contaminated. Therefore, maintaining a good hydraulic filtration system will increase the life of the hydraulic system. A hydraulic filter helps to remove these particles and continuously cleans the oil. The performance of each hydraulic filter is measured by its pollution removal efficiency, for example, the soil retention capacity. Call.
German Rexroot pressure line filter is usually placed after the hydraulic pump to remove the excess particles inside the oil. The filter placed at this point must have the highest micron level and pressure tolerance level. After this path, the oil enters the actuator and other control valves, the presence of this filter is very important and necessary. Pressure line filters are widely used in fixed and mobile units in road construction and hydraulic machines.